Imperial 96289 SAE 37 Degree JIC Steel Male Connector, 1/2″ x 1/4″,Per package of 5 Store Sale Online

Highlights:

• Pipe Thread: 1/4″
• Thread Size: 3/4″-16
• Tube Outside Diameter: 1/2″
• Working pressure up to 10,000 psi, depending on tube and fitting size
• Used with copper, brass, steel, aluminum, and other tubing that can be flared
• Good resistance to vibration. Use two or three piece nut design where greater vibration resistance is required
• Applications include medium and high pressure lines on heavy construction, agricultural, and transportation equipment
• Meets or exceeds ASA, ASME, SAE, and MS specifications
• Cross Reference: C5205 x 8 x 4
• Per package of 5

Assembly Instructions:

• Slide nut on tubing. Threaded end of nut must face out
• Slide sleeve on tubing (3-piece assembly). Collar end of sleeve must face out
• Flare tubing and check flare diameter. Examine for excessive thin-out. On thin wall tubing, use double flare to prevent pinch-off
• Assemble tubing to fitting body. Tube nut should be turned hand tight
• Tighten assembly with a wrench