Imperial 97236 JIC Swivel Nut Tee, 1″ Outlet Exclusive

Highlights:

• Angle: 37 degree
• DOT Approved: No
• Finish: Trivalent Zinc Plated
• Fitting Style: JIC
• Fitting Type: Flare Fitting
• Grade: 12L14
• Heat Treated: No
• Material: Carbon Steel – AISI/SAE 12L14
• Shape: Swivel Nut Run Tee
• System of Measurement: Fractional
• Temperature Range (Deg F): -65 to +400 deg. F
• Thread Style: SAE
• Working Pressure: Up to 6,000 psi
• Working pressure up to 10,000 psi, depending on tube and fitting size
• Used with copper, brass, steel, aluminum, and other tubing that can be flared
• Applications include medium and high pressure lines on heavy construction, agricultural, and transportation equipment
• Meets or exceeds ASA, ASME, SAE, and MS specifications
• Good resistance to vibration. Use two or three piece nut design where greater vibration resistance is required
• Tube Outside Diameter: 1″
• Thread Size: 1-5/16–12″
• Cross Reference: C5706 x 16

Assembly Instructions:

• Slide nut on tubing. Threaded end of nut must face out
• Slide sleeve on tubing (3-piece assembly). Collar end of sleeve must face out
• Flare tubing and check flare diameter. Examine for excessive thin-out. On thin wall tubing, use double flare to prevent pinch-off
• Assemble tubing to fitting body. Tube nut should be turned hand tight
• Tighten assembly with a wrench