High Flow HTA Complete HotEnd For Bambu Lab X1E Geniue Stockist For Sale

E3D are very proud to be the only officially approved manufacturer of aftermarket Bambu Lab HotEnds! These High Flow HTA (High Temperature Abrasive Resistant) HotEnds were developed in collaboration with Bambu Lab.

Professional HotEnds for professional applications; improve the efficiency of your X1E and the finish of your prints with this simple upgrade.

High Flow. There’s no denying that the Bambu Lab X1E printer is built for speed. However, the motion system, as remarkable as it is, has headroom to be even better. That’s where E3D High Flow technology comes in. Using our internal nozzle modification, we’ve managed to increase the volumetric flow rate of the HotEnd by 60%! That means you can expect more reliable and consistent extrusion at the same speeds or bump up the volumetric flow rate limit in the slicer to utilize the motion system’s capabilities fully.

Hard And Hot. These HotEnds are coated with Chromium Nitride to provide additional abrasive resistance and corrosion prevention properties up to 320°C. Perfect for printing engineering-grade materials such as PPA-CF and PPS-CF at faster print speeds. Alternatively, maintain your stock profiles and experience improved interlayer adhesion.

Improved Layer Adhesion. High-speed printing often sacrifices visual and functional aspects in favor of speed, but these HotEnds maintain interlayer adhesion strength even at higher speeds, resulting in the correct filament finish and strong parts for functional applications. Don’t just take our word for it though – check out this video from Printing Perspective where he puts it to the test!

No Compromise. These HotEnds are a drop-in replacement for your stock X1E HotEnd, no adjustment to the mount or part cooling is required. Complete the upgrade in under 5 mins with our installation video guide.

Some filled materials contain particles that are close to, if not larger than, some of the smaller industry-standard nozzle sizes, including up to 0.4mm. Attempting to print such materials through these nozzle sizes significantly increases the risk of a jam. Please check your filament manufacturer’s datasheet for recommended minimum nozzle orifice diameter to ensure that the nozzle/hotend you choose is suitable for your use case.

Compatibility. This HotEnd is only for use with Bambu Lab X1E.

Supported Filaments:

Optimal: PLA, PETG, TPU, PVA, BVOH

Superior: ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced PLA, PETG, PA, PET, PC, ABS, ASA

Ideal: PPA-CF/GF, PPS, PPS-CF/GF

Please note:
Some filled materials contain particles close to, if not larger than, some of the smaller industry standard nozzle sizes, including up to 0.4mm. Attempting to print such materials through these nozzle sizes significantly increases the risk a jam. Please check your filament manufacturer’s datasheet for recommended minimum nozzle orifice diameter to ensure that the nozzle/hotend you choose is suitable for your use case